用嵌缝料填缝，然后用高强接缝纸带贴缝加固。
（1）施工前先进行板缝的表面处理,除去浮尘、疏松物及各种不利于黏结的物质。然后用泥刀将调和好的石膏嵌缝膏抹在楔形边缘接缝处。确定接缝纸带的位置，再用泥刀将接缝纸带在上端粘牢。 
（2）然后用泥刀自上向下挤出多余的石膏嵌缝膏，使纸带牢牢地与石膏板粘牢，将纸带的中心线与板缝对齐。用泥刀将石膏嵌缝膏薄薄地涂抹在接缝纸带表面，将接缝纸带完全涂满。用批刀刮掉多余的接缝膏。凝固后如需要可用细砂纸将其打磨平整。 
（3）用泥刀抹上薄薄的第二层石膏嵌缝膏，两边分别宽出第一层约50㎜，干燥后再用细砂纸打磨平整。 
（4）在阴角的两边均匀地抹上石膏嵌缝膏。对折接缝纸带后贴到阴角内，使它紧紧地嵌入石膏嵌缝膏。同平面接缝也用泥刀自上向下挤出多余的嵌缝膏

Paper tape is suitable to be reinforced gypsum board joints and corners prior to painting, wallpapering.

 Type: Laser holes or pinholes on the paper for ventilation 

SIZE: 50mm x 23m/roll, 50mm x 75m/roll, 50mm x 90m/roll, 50mm x 150m/roll, etc. 

 WEIGHT:135G/M2; 145G/M2, etc

Application: Drywall Joint Paper Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering.

Joint tape is super strong both wet and dry. The tapered edges offer invisible seams.

Joint tape is sparked, making it the type preferred by professionals. paper tape: laser hole, middle crease, rough surface, USA paper, 140-145gsm,

Caution: Apply joint paper tape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter.